MACHINE CONTROL for big savings on small projects

Unicontrol2D is an affordable 2D machine control system that helps small contractors dig faster and more precise. You’ll save time, cut costs, and complete jobs with less labor!
Contact Now
gps machine control excavator

WHY 2D MACHINE CONTROL IS A SMART INVESTMENT

Accuracte Excavation

Get the right depth and slope every time. 2D machine control reduces rework and material costs with instant feedback, so you’ll never over-dig again.

Affordable Quality

Unicontrol2D is the most affordable way to boost earthmoving efficiency—without compromising on quality. With the simplest upgrade path on the market, you can invest safely today, knowing your system is ready for future needs.

Increased Efficiency

Finish jobs faster with accurate 2D machine control. Spend less time on grade checking and stake-out, so you can move to the next job faster. High-performance sensors and an intuitive interface with instant feedback make earthmoving more efficient than ever.
unicontrol gps rover used by user

Instant Feedback

The in-cab interface connects to IMU sensors, giving operators instant feedback on depth and slope for precise digging.
unicontrol gps rover used by user

Laser Reciever Compatability

Unicontrol2D supports laser receivers, offering ±2mm accuracy. The cut/fill display guides operators to maximum precision
unicontrol gps rover used by user

Easy Re-benching

With the Store & Load function, you can save reference points and continue working with consistent precision after moving the machine.
unicontrol gps rover used by user

Joystick Integration

Connect your joystick to Unicontrol2D for quick job adjustments with minimal screen interaction. Customize the controls to fit your individual needs, ensuring more efficient operation.
unicontrol gps rover used by user

Simple Upgrade to 3D

The 2D machine control system uses the same quality hardware setup as our 3D system, meaning contractors only need GNSS antennas installed to be ready for 3D technology.
unicontrol gps rover used by user

Affordable Quality 2D system

Unicontrol2D is the most accessible machine control system. Its simple tablet interface and high-quality sensors make precision affordable for any contractor.

What is 2D machine control?

A 2D machine control system is designed for simple yet critical tasks like digging septic tanks or creating surfaces with proper water drainage. Operators use Unicontrol2D to set their target surface—either with the bucket tip or a laser, depending on your setup.

The system then guides you to dig precisely to that target. With high-performance sensors on your machine and an in-cab tablet, Unicontrol2D gives instant feedback on the bucket’s position relative to your reference point.

As you work, the system calculates height and slope in real-time, ensuring faster, more accurate digging and grading to meet the exact specifications of your task.
1

High-performance IMU sensors

2

Intuitive tablet interface

3

Laser receiver

IMU sensor
Before Unicontrol 3D
Before Unicontrol 3D

Application Scenarios

Rework, material waste, and high labor costs are major challenges for contractors. With Unicontrol2D, you overcome these by getting instant feedback on exactly where to dig. Use it for fine-grading, trenching, and creating sloped surfaces with precision.

Fine-grading

SLOPES

Sloped surfaces

Trenching

Fine Grading

Unicontrol2D helps you prepare housing foundations and other jobs requiring a level base. Know exactly how much material to order and finish faster—without over-digging or wasting resources.

TRENCHING

Install pipes and septic tanks with the correct grade and depth the first time. With accurate trenches, you avoid rework, reduce mistakes, and ensure drainage systems work perfectly.

Slopes

Dig a trench or sewer with the slope function, always following the body heading of the machine.

Sloped surfaces

Creating surfaces with proper water drainage for parking lots or driveway construction is crucial. Unicontrol2D ensures faster, more accurate sloped surfaces to get the job done right.

GET GOING WITH 2D,
UPGRADE WHEN READY

Unicontrol2D is your easy entry into construction tech, with the simplest upgrade path on the market. Once you're ready, you can unlock 3D functionalities without replacing any existing hardware.

Built with 3D-quality components, Unicontrol2D only requires GNSS antennas to upgrade to 3D. And if a job calls for 2D, you can always switch back—ensuring you’re ready for any task.
Get Started
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Faroe Islands
Finland
France
Germany
Hungary
Hungary
Iceland
Ireland
Italy
Latvia
Lithuania
Netherlands
New Zealand
Norway
Poland
Romania
Serbia
Slovakia (Slovak Republic)
Sweden
Switzerland
United Kingdom
United States
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Contact us
to learn more

Want to save time, reduce costs, and work smarter?
Fill out the form, and we’ll get in touch to provide a personalized offer tailored to your machine and needs.

Brochure

Download

Quick Guide

Download

FAQ

What is 2D machine control?

A 2D machine control system is designed for simple yet critical tasks like digging septic tanks or creating surfaces with proper water drainage. Use Unicontrol2D to set the target surface—either with the bucket tip or a laser, depending on your setup. The system then guides you to dig precisely to that target. With high-performance sensors on the machine and an in-cab tablet, Unicontrol2D gives instant feedback on the bucket’s position relative to the reference point.

How easy is it to set up and use Unicontrol2D?

Unicontrol2D has an easy setup, only including the installation of high-performance IMU sensors and a tablet inside the machine. It is optional to have it installed with a laser reciever, but this set-up allows the user to achieve more accurace results.

What types of jobs can I complete with 2D machine control?

2D machine control is commonly used to increase the accuracy of the following jobs: septic tank installations, housing foundations, parking lot & driveway constructions.

Can I upgrade to 3D machine control later?

Unicontrol2D can always be upgraded to 3D machine control - even without replacing existing hardware.

Still have questions? Email us at support@unicontrol.io
Untitled UI logotext
+45 89 800 240
Unsbjergvej 4D, 5220 Odense SØ
contact@unicontrol.io
Solutions
Excavator
Wheel Loader
Dozer
New
Skid Steer
Compact
Rover
Cloud
Resources
Blog
Learn Unicontrol
Facebook
Instagram
YouTube
LinkedIn
© 2024 Unicontrol ApS
Terms And ConditionsPrivacy Policy